How to Install Artificial Grass on Gravel in 7 Steps

The installation of artificial grass on gravel is the ideal solution for those areas that you need to cover such as areas for walks, games, swimming pools or gardens.

A priori it may seem like a complicated task, but by following this 7-step guide to installing your artificial grass on gravel you will be able to do it yourself.

1- Choose the right materials

Before putting on your gloves, you need to analyze and choose the materials you will need to prepare the ground and start the installation: gravel class and artificial grass style.

Depending on the characteristics of the installation area, the type of materials you will use will vary

The gravel is a key element to achieve a professional finish of the installation, with a firm floor and without holes under the artificial grass.

Types of gravel to make synthetic grass base

Gravel or crushed stone. Formed by different types of crushed rocks, limestone is the most recommended for its compaction capacity, generating a solid and durable surface.

Boulder and river sand. A widely used mixture that favors water drainage.

Natural or artificial dragger. Made by uncrushed aggregates from natural gravel pits, or if they are artificial from aggregate processing plants. Did you know the best high quality artificial grass at Mydeal.

The type of use you will give to the installation area, whether for artificial grass for terraces, artificial grass for decorative use, artificial grass for sports use or for artificial grass for swimming pools, determines the artificial grass model you select.

2- Preparation of the ground

Thoroughly clean the terrain. It is important to properly clean the space where you will be installing.

3- Level the area

The leveling of the terrain will be essential in the correct finish of the installation.

With the help of a rake, spread the gravel you have chosen throughout the installation area, seeking the greatest possible uniformity for a good leveling of the soil.

Moistens and compacts the soil

Once the gravel is extended and leveled, it is time to moisten the area. Watch out! Don’t puddle the gravel; just carefully moisten evenly.

To compact the land you must use a compactor, either electric or manual, until you get a solid, compact and regular surface.

4- Geotextile Mesh

It is important to install the geotextile mesh to avoid, in the future, the appearance of weeds and that the mud seeps into the synthetic grass through its pores.

5- Measure, cut and place the artificial grass on the gravel

With the area prepared and the geotextile mesh fixed it is time to measure.

Cut the synthetic grass cloths to the length and width you need to cover the entire area completely.

Leave about 5 centimeters of margin to make a good finish on the edges of the installation area.

6- Bands for bonding and bonding between grass cloths

Once all the parts necessary to cover the entire area have been placed and stretched, it passes to its union.

Make sure you have perfect alignment between the fragments before applying the artificial grass bond tape.

Once everything is ready, apply the bio component glue, a green polyurethane adhesive for bonding synthetic grass. You must leave to dry for 24 hours.

 Placement of the pegs

To ensure that your lawn is kept in the proper place, it is essential to anchor it with artificial grass fixing pegs around the entire perimeter.

7- Hairstyle of the grass

Finally you have done the complete installation. However, the work is not yet finished.

Artificial grass styling is important for your lawn to look splendid and enjoy it.

Conclusion

The installation of artificial turf on gravel in small spaces can be simple, but if you need to make a larger facility is essential to have expert advice on the subject.

Leave a comment